logo comp4

What is the difference between dust test chamber?After reading this article, you know!


dust test chamber is reasonable, simple, easy to operate Maintenance, all indicators are in line with national standards. The dust test chamber is mainly used for two levels of IP5X and IP6x specified in the housing protection level standard. It is suitable for various automotive parts to do dustproof and dust-proof tests. Test components contain lights, instruments, electrical dustproof. Set, steering system, door lock, etc., and the sealing of the product.
dust test chamber

is used:

Mainly used in two levels of IP5X and IP6x specified in the housing protection grade standard, suitable for use in various auto parts Dust and dust test, the test component includes a lamp, instrument, electrical dust cover, steering system, door lock, etc., and the sealing of the product. This environmental test equipment, equipment design is reasonable, easy to operate, easy to maintain, and various indicators are in line with national standards.


dust test chamber simulates the dust climate in nature This chapter introduces the dust, blow, dust and humidity requirements of dust test chamber:


blow

For study the adaptability of the equipment to blow (le; 149 Mu; m). Test temperature: High temperature or storage of high temperatures obtained from the temperature response of test piece from the high temperature test (GJB150.3A); humidity le; 30%.


blowing:

The ability to study the effects of equipment to the blow (150 MU; M ~ 850 MU; M). Test temperature: High temperature or storage high temperature obtained from the temperature response of the test piece in the high temperature test (GJB150.3A); humidity le; 30%.

During the dust: [12


For the study, dust can be covered or enclosed in the dust, and the dust can be accommodated for a long time (eg office, experiment).Room, storage room and tent), dust (Le; 105 Mu; M) on equipment (usually electrical equipment).During the dust, it also affects the heat dissipation of dust in the top surface.The dust collecting test is also used to verify the quality of the air filter at the inlet of the air contaminated sampler in the outdoor use.Test temperature: No. 23 ° C 2 ° C.Humidity le; 30%.

Copyright © 2021.Qinsun Instruments Co., Ltd All rights reserved.