The desktop xenon lamp test box uses a xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments, which can provide corresponding environmental simulation and accelerated tests for scientific research product development and quality control. The desktop xenon lamp test chamber can be used for the selection of new materials, the improvement of existing materials or the evaluation of durability changes after the composition of materials is changed. It can well simulate the changes of materials exposed to sunlight under different environmental conditions.
The entire equipment of the desktop xenon lamp test box is made of imported SUS304 stainless steel light board, the outer surface is sprayed with plastic, beautiful in appearance, novel, dynamic rotating sample, adjustable speed; imported numerical control instrument, small time programmer; equipped with filtered observation window, and will be harmful The gas is discharged at the tuyere; the desktop xenon lamp aging illuminance can be adjusted from 300 to 780nm, and the desktop xenon lamp test box is adjusted according to the industry product standard, and the current is 0 to 30A
Test box-a small economical xenon lamp tester with an exposure area of 560cm2.
Light source-air-cooled xenon lamp, irradiance is controlled at 300-800nm.
Control system-two-line LED display keyboard control system; monitors and controls irradiance and black mark temperature, monitors and displays the temperature of the test box; microprocessor controls all parameters; users can calibrate and adjust irradiance; can store 6 A user preset program, each up to 6 segments.
Support 1500W high-power precision air-cooled xenon lamp tubes, each tube is guaranteed for 1500 hours, and the equipment is equipped with a tube as standard
Maximum exposure area of 560 cm2
Direct setting and control of irradiance (300-800nm or 300-400nm/340nm)
Directly set and control the black mark temperature BST
Display the temperature in the box
The control panel displays all control parameters and automatic diagnosis information
Built-in 2 built-in test programs
Support 6 custom test procedures
Multilingual user interface
With desktop design, dimensions: 79cm long x 36cm wide x 36cm high
Static flat sample stage for flat and 3D sample testing
Control the black mark temperature of 45-100 °C by fan (without SunCool cooler)
Long-lasting filter system and reflector that are not prone to aging, coated quartz filter and optional reflector
Automatic countdown function based on irradiation amount or time
Use the basic filter as a carrier for additional optical filters
RS232 data output interface
Software update via internal integrated memory card
Studio size: 320*500*300mm
Power: ≤3.5KW (lamp tube life is about 2500 hours)
Temperature range: RT+10～70℃
Fluctuation degree; ±0.5℃
Cooling method: air cooling
Rain time: adjustable from 0 to 99 minutes (with or without spray, optional)
Light source; air-cooled xenon arc lamp
Equipment characteristics: with light, temperature
Radiation intensity; 0.51W (340nm)
Dimming range: 5%～100%
Controller: select the original imported microcomputer PID temperature controller for temperature control
Temperature control accuracy: ±0.01℃, use a metal body with chrome-plated surface to form a black module body, and then fix the sensor on the surface to test the effective temperature; to represent the component temperature (two black modules are delivered)
Sensor: platinum resistance. PT100Ω/MV
Time controller: Adopt Dahua control system, timing range 0～999H;
Heating method: SSR solid state relay non-contact heating
Water supply mode: if with spray, with water replenishment function
Water level control: stainless steel level gauge
Water tank: external fixed water tank 5L
Final Rule FDA-1978-N-0018
ICH Guideline Q1B
What Can I Do For You?
You can also send a message to us by this email [email protected], we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!